Search results

The purpose of this study is to investigate why users turn to the university library’s reference desk and whether librarians make use of the opportunity to conduct reference interviews to disclose any unexpressed information needs.

This paper presents the results from a qualitative exploration study where interactions between librarians and users were observed in authentic situations at the reference desk and analyzed using a modified version of Radford and Connaway’s (2013) categorization of inquiries.

Most inquiries were seemingly easy to answer and pertained to collections and procedures in the library. Lending out desk supplies accounted for a high proportion of the activity. Only a small number of requests were subject-oriented and reference interview techniques were only used in 5% of the recorded inquiries. This means that the users’ information needs were not probed in the vast majority of the interactions.

The study is exploratory and mirrors the activity that takes place in one specific library. The low number of reference interview techniques used may indicate a lack of interest in users’ information needs, which signifies a risk of the reference desk being reduced to an arena for instrumental and superficial interaction between librarians and users.

This study illustrates current developments in work at a physical library desk. Few recent studies address face-to-face interactions between librarians and users.

Al‐alumina interconnected phase composites were processed using the direct fused deposition process. These materials with tailored microstructures can find applications as structural materials with gradient properties.

In this process, feedstock material with fused silica as a starting material was compounded at a high shear mixer and then extruded as a filament using a single screw extruder. Extruded filaments were used with a commercial fused deposition modeler, FDM 1650, to process controlled porosity green ceramic structures. Porous green ceramic preforms were subjected to binder removal and sintering cycles in furnace air. Controlled porosity sintered ceramic structures were infiltrated with Al 5052 metal by pressureless reactive metal infiltration to form an in situ Al‐alumina structured composite.

The main advantage for this approach is to control distribution of both metal and ceramic phases in the composite. During metal infiltration good bonding was observed between the metal and the ceramic phases. Composites were tested under both quasi‐static and dynamic shock loading to evaluate their mechanical properties. Compression strength of these composites was 689±95 MPa.

This paper describes application of the direct fused deposition process for fabrication of ceramic/metal composites where both macrostructure as well as microstructure can be controlled simultaneously. The paper also focuses on one of the potential application area for 5052‐Al alloy.

The purpose of this paper is to study lightweight security scheme for Internet of Things (IoT) applications using Constrained Application Protocol (CoAP). Resource-constrained characteristics of IoT systems have ushered in compelling requirements for lightweight application protocol and security suites. CoAP has already been established as the candidate protocol for IoT systems. However, low overhead security scheme for CoAP is still an open problem. Existing security solutions like Datagram Transport Layer Security (DTLS) is not suitable, particularly due to its expensive handshaking, public key infrastructure (PKI)-based authentication and lengthy ciphersuite agreement process.

This paper proposes a lightweight security scheme in CoAP using Advanced Encryption Standard (AES) 128 symmetric key algorithm. The paper presents an object security (payload embedded)-based robust authentication mechanism with integrated key management. The paper introduces few unique modifications to CoAP header to optimize security operation and minimize communication cost.

It is resilient to number of security attacks like replay attack, meet-in-the-middle attack and secure under chosen plaintext attack. This scheme is generic in nature, applicable for gamut of IoT applications. The paper proves efficacy of our proposed scheme for vehicle tracking application in emulated laboratory setup. Specifically, it compares with DTLS-enabled CoAP to establish the lightweight feature of our proposed solution.

This paper mainly focuses on implementing in-vehicle tracking systems as an IoT application and used CoAP as the application protocol.

Such a lightweight security scheme would provide immense benefit in IoT systems so that resource constraint-sensing devices and nodes can be made secure. This would impact IoT eco systems to a large extent.

Such kind of security suite that provides both robustness and lightweight feature is hitherto not known to the authors, particularly in CoAP for IoT applications.

A new family of thermoplastic binders has been developed for usage in fused deposition of ceramics (FDC). Mixtures were formulated consisting of a base binder, tackifier, wax, and plasticizer. The resultant formulation was chosen based on mechanical, rheological, and thermal property requirements. A formulation consisting of 100 parts base binder (by weight), along with 20 parts tackifier, 15 parts wax, and five parts plasticizer exhibited an optimized compromise of mechanical, rheological, and thermal properties. This formulation was compounded with 55 vol. per cent lead zirconate titanate (PZT) powder, and extruded into filaments with a diameter of 1.75mm and a length of approximately 50 (+/‐10) cm. The resulting filaments were used to fabricate functional piezoelectric ceramic devices via FDC. The binder development process is described, along with the associated mechanical, rheological, and thermal property data.

Reviews the inherent advantages, i.e. design flexibility and processing, of manufacturing piezoelectric ceramics and composites with numerous architectures via rapid prototyping techniques. Reports on processing in which piezoelectric ceramics and composites with novel and conventional designs were fabricated using rapid prototyping techniques. Fused deposition of ceramics, fused deposition modeling, and Sanders prototyping techniques were used to fabricate lead‐zirconate‐titanate ceramics and ceramic/polymer composites via, first, direct fabrication and, second, indirect fabrication using either lost mold or soft tooling techniques.

This paper aims to present a new mathematical model for laminated rhombic conoids with reasonable thickness and depth. The presented model does not require the shear correction factor, as transverse strain variation through the thickness was assumed as a parabolic function. The zero transverse shear stress provision at the bottom and the top of rhombic conoids was enforced in the model. The presented model implemented a C⁰ finite element (FE) model, eliminating C¹ continuity requirement in the mathematical model. The proposed model was validated with analytical, experimental and other methods derived from the literature.

A novel mathematical model for laminated composite skew conoidal shells has been proposed. Parabolic transverse shear strain deformation across thickness is considered. FE coding of the proposed novel mathematical model was done. Slope continuity requirement associated with present FE coding has been suitably avoided. No shear correction factor is required in the present formulation.

This is the first attempt to study the bending response of laminated rhombic conoids with reasonable thickness and depth. After comparisons, the parametric study was performed by varying the skew angles, boundary conditions, thickness ratios and the minimum rise to maximum rise (hl/hh) ratio.

The novelty of the presented model is reflected by the simultaneous addition of twist curvature in the strain field as well as the curvature in the displacement field allowing the accurate analysis of reasonably thick and deep laminated composite rhombic conoids. The behavior of conoids differs from that of usual shells such as cylindrical and spherical due to the conoid’s inherent twist curvature with its complex geometry and different location of maximum deflection.

The Moravian Library has noted a long-term decline in the total number of visitors and the number of books either lent or used for reference, a phenomenon, which is generally explained by the increased availability of digitised books and a wider selection of electronic services in general. This paper aims to examine whether this is indeed the case, comparing the usage of the physical and digital libraries. The study also examines whether all the elements of library usage change accordingly with the digital transformation of the library’s services, what are the actual implications of this trend for research libraries in general, determining an ideal model for such a library; it proposes possible solutions to the challenges digital transformation brings about. At the same time, the study attempts to answer the question whether the overall number of library users is actually decreasing or increasing and what impact digital transformation has on the reach of library services.

Comparative analysis of data with offline usage statistics on one hand and data obtained via backend logging and Google analytics on the other, and an evaluation of a questionnaire survey among digital library users.

The data analysis demonstrates that it is not only possible but also even desirable, to gradually replace traditional library services with a digital infrastructure without major complications.

The case study provides statistically substantiated examples of a successful partial digital transformation in a research library in the Czech Republic.

In this article we present the system that we have developed at Rutgers University for the solid freeform fabrication of multiple ceramic actuators and sensors. With solid free form fabrication, a part is built layer by layer, with each layer composed of roads of material forming the boundary and the interior of the layer. With our system, up to four different types of materials can be deposited in a given layer with any geometry. This system is intended for fabrication of functional parts; therefore the accuracy and precision of the fabrication process are of extreme importance.

This study investigates the asymmetric influence of renewable energy consumption (REC) and trade openness (TO) in the pathway of decarbonizing of Indian economy.

By exploiting fifty years of annual time series data spanning from 1970 to 2019 with the augmentation of nonlinear autoregressive distributed lag technique with the consideration of GDP and industry value added (IVA) as control variables.

Our This research not only demonstrates the asymmetric association among the employed variables but also shows that negative shock to REC stimulates emissions, where as positive shock on the same policy variable promotes environmental quality improvement. Negative shock to TO is found to be associated with the corresponding increase of environmental quality, but the positive shock on the same intensifies environmental pollution. IVA is also found to be associated with intensifying environmental squalor. In addition, the research provides the empirical evidence of existence of “EKC” hypothesis in India as long-run coefficient associated with GDP looks smaller than short-run coefficient of GDP.

It was difficult to include may other causal variables due to nonavailability of data pertaining to those variables.

Moreover, some policy guidelines have also been recommended for India at the end that may aid India to achieve net zero emissions by 2070.

This is an original research paper carried out by the authors and has not yet been submitted elsewhere.

The purpose of this paper is to determine the impact of loan concentration on the returns of Indonesian banks and examines whether bank ownership types affect the relationship between concentration and returns.

This research uses heuristic measures of concentration: The Hirschman–Herfindahl index and Deviation from Aggregated Averages are applied to Indonesian banks across all sectors. The data covers the pre and post global financial crises periods from 2003-2011 for 109 commercial banks in Indonesia. Panel feasible generalised least squares analysis was applied.

The findings show that loan concentration increases bank returns. The positive effect of concentration on returns tends to be more significant for domestic-owned banks. In addition, the interaction effect shows that the positive effect of concentration on returns is less for foreign-owned banks.

The Indonesian central bank changes to the reporting format of sectoral loan allocation by banks since 2012 in terms of the Indonesian Banking Statistics Details of Enhancement matrix requires separate data analysis for 2012 onwards. The findings of this paper could be enhanced by more detailed data like interest rate expenses and bank level sectoral non-performing loans data.

The findings suggest that a focus strategy provides better returns. Moreover, bank ownership types is an important factor to consider when setting a bank lending policy.

This paper is among the few studies where different measures of loan concentration in combination with measures of return are applied in Indonesia as an emerging Asian country. The research also provides evidence of the impact of concentration on the interest earnings of the loan portfolios of banks in addition to return on assets and return on equity that are generally applied as measures of return in previous research.